For many years there seemed to be a single dependable way for you to keep info on a pc – by using a hard disk drive (HDD). Nevertheless, this sort of technology is already showing its age – hard drives are loud and slow; they’re power–ravenous and tend to create a lot of heat during intense procedures.

SSD drives, however, are swift, use up much less power and are generally far less hot. They provide a brand new strategy to file access and data storage and are years in advance of HDDs in terms of file read/write speed, I/O performance and power efficiency. Find out how HDDs stand up against the newer SSD drives.

1. Access Time

Image

Because of a radical new way of disk drive functionality, SSD drives enable for much quicker data file access rates. With an SSD, data file access times are far lower (under 0.1 millisecond).

Image

The concept driving HDD drives goes back to 1954. And even while it’s been considerably polished progressively, it’s nevertheless no match for the ingenious technology powering SSD drives. Having today’s HDD drives, the best data access rate you’ll be able to reach can vary between 5 and 8 milliseconds.

2. Random I/O Performance

Image

As a result of very same revolutionary strategy that permits for faster access times, you too can take pleasure in greater I/O efficiency with SSD drives. They’re able to conduct two times as many operations throughout a specific time as opposed to an HDD drive.

An SSD can deal with a minimum of 6000 IO’s per second.

Image

Hard drives deliver reduced data access speeds due to older file storage space and accessibility technology they are employing. In addition, they exhibit substantially slower random I/O performance in comparison with SSD drives.

During Lovenote Websites’s tests, HDD drives maintained an average of 400 IO operations per second.

3. Reliability

Image

SSD drives don’t have any kind of moving elements, meaning that there is far less machinery within them. And the less actually moving components you will discover, the lower the probability of failure can be.

The common rate of failure of any SSD drive is 0.5%.

Image

With an HDD drive to operate, it has to spin a couple metal disks at over 7200 rpm, holding them magnetically stabilized in the air. There is a great deal of moving elements, motors, magnets along with other devices jammed in a small place. Hence it’s no surprise that the regular rate of failure of the HDD drive can vary in between 2% and 5%.

4. Energy Conservation

Image

SSDs lack moving elements and need hardly any chilling energy. In addition, they need not much power to function – lab tests have indicated that they’ll be powered by a common AA battery.

In general, SSDs take in between 2 and 5 watts.

Image

HDD drives are renowned for getting noisy; they can be at risk from getting hot and whenever there are several disk drives in one server, you have to have one more a / c system simply for them.

As a whole, HDDs consume between 6 and 15 watts.

5. CPU Power

Image

The speedier the data file accessibility rate is, the quicker the data file demands are going to be adressed. Consequently the CPU won’t have to reserve assets looking forward to the SSD to respond back.

The normal I/O wait for SSD drives is merely 1%.

Image

In comparison to SSDs, HDDs enable slower data access rates. The CPU will be required to await the HDD to come back the demanded data, saving its assets meanwhile.

The common I/O wait for HDD drives is around 7%.

6.Input/Output Request Times

Image

The bulk of our brand–new machines moved to solely SSD drives. Each of our lab tests have demonstrated that with an SSD, the typical service time for an I/O request although operating a backup stays below 20 ms.

Image

Using the same web server, however, this time furnished with HDDs, the results were completely different. The normal service time for an I/O request changed in between 400 and 500 ms.

7. Backup Rates

Image

Another real–life improvement is the rate at which the back–up was produced. With SSDs, a server backup now can take only 6 hours by using Lovenote Websites’s server–designed software solutions.

Image

We employed HDDs mainly for quite a while and we have decent knowledge of precisely how an HDD works. Creating a backup for a server furnished with HDD drives is going to take around 20 to 24 hours.

To be able to easily boost the functionality of your respective web sites without needing to alter just about any code, an SSD–driven website hosting solution is a very good choice. Examine the hosting packages and then our Linux VPS web hosting services – our services feature really fast SSD drives and are offered at good prices.


  • Service guarantees

  •  
  • Join us now. There won’t be configuration service fees and you’ll have total SSH/full root access to your server. 99.9% network uptime is guaranteed.
  • Compare our prices

  •  
  • Preview the tools and characteristics offered by our Virtual Private Servers. You could start with a smaller VPS Web Hosting configuration and move up with a click as your demands grow.
  • Compare our hosting plans
  • Contact Us

  •  
  • Get in touch with us 24x7x365 by email or by utilizing the extremely–fast ticketing system. Our techs are going to answer any of your questions in up to 1 hour.